Major Projects Completed
Shipbuilding/Marine Engg./Naval Architecture
- Guidelines on Container Stowage and Securing Arrangements
- Provisional design S-N curves of FCA steels
- Application of FCA steels
- Guidelines on Shipboard Wireless LAN Systems
- Risk Assessment of Propulsion Systems for LNG Carriers
- Development of Total Support System throughout the life cycle of an LNG carrier
- Development of “Guidelines on brittle crack arrest design”
- Technical appraisal of ship performance in actual seas (container ships)
- Structural Safety Assessment of Mega-container Ship
- Development of anticorrosive steel and its application to oil tanks in tankers
- "AURIGA LEADER" - car carrier equipped with solar panels
- Damage Summary for the year 2008
- Online Application System for Surveys and Audits
- Development of "Risk Assessment Guidelines"
- Results of Practically-oriented R&D Projects in 2007-2008
- Guidelines for laser beam arc hybrid welding
- Guidelines for the Prevention of Human Error Aboard Ships
- Safety Management Manual (International Safety Management Code)
- Technical Guide Regarding the Strength Evaluation of Hull Structures
- INTERIM REPORT ON THE INVESTIGATION OF CAUSES OF THE NAKHODKA ACCIDENT
- Strength of Transverse Bulkhead at Flooding of Hold in a Bulk Carrier
- Research on Ship Manoeuvrability
- Guidance for Fatigue Design of Ship Structures
- Research and Development of Mega-float
- An Introduction to Formal Safety Assessment of Ships
- Ship Condition Monitoring System Developed by NK
- STEP AP 215 - Ship Arrangements (E to J)
- Defects in Hull Structure
- Machinery Damage Reports
- Classification Society Rules for Examination and Testing of Materials and Equipment
- Regulations for Classification and Registry of Ships
- Preparatory Procedures for Entering/Leaving Port
- Procedures for Special Operations
- Optimization for Control Measures in Probablistic Safety Assessment of Grounding and Collision
- Weld Residual Stress in Corner Boxing Joints
- Influence of Corrosion Wastage on the Fatigue Strength of Fillet Welded Joints
- Progress of Corrosion in Painted Steel Plates in a Sea Water Environment
- Analysis of Shaft Alignment considering Hull Deformation
- Propeller Shaft Displacement of NOPS
- Shaft Alignment in Large Ships
- Calculation of Optimum Alignment of Propeller Shaft
- Techniques for Enhancing Reliability of Oil-lubricated Stern Tube Bearings
- Characteristics of cresylic resin bearing for stern tubes
- Theoretical and Experimental Research on Stern Tube Bearing Lubrication
- Damage to stern tube bearing
- Stern Tube Bearing Peel-off Problem
- "Research on the development of large, ultra high speed ships"
- Coupling bolt failures
- FUNDAMENTALS OF DAMAGE TO MARINE PROPELLERS AND SHAFTS
- System for Analyzing Propulsion Shaft Alignment Considering Shaft Deflection
- ANALYSIS AND SURVEY PROCEDURES OF PROPULSION SYSTEMS
- Actual Status of Planning and Design Methods for Shaft Alignment
- Procedure for Sub-contracting Technical Calculations
- Document and Data Control
- REGULATIONS FOR TECHNICAL SERVICES
- Lecture for General Managers of Overseas Offices
- Guidelines for Direct Strength Calculation (Double-hull Tankers)
- Guidelines for Fatigue Strength Calculation (Double-hull Tankers)
- Guidelines for Assessment of Ultimate Longitudinal Bending Strength (Double-hull Tankers)
- Concepts of Corrosion Evaluation
- "GUIDELINES ON THE MEANS OF ACCESS TO STRUCTURES FOR INSPECTION AND MAINTENANCE OF OIL TANKERS AND BULK CARRIERS"
- Speech by the Chairman of the Society of Naval Architects of Japan
- Minimum means of access for effective inspections (E->J)
- Examples of Recent Accidents due to Inadequate Servicing/Maintenance and Errors in the Operation of Engine-associated Equipment
- Damage Investigation Report - Forced Draft Fan
- Preparations before entering port and discharging cargo (VLCC)
- Start of discharging work (VLCC)
- Crude Oil Washing (VLCC)
- Final Stage of Discharging Operation (VLCC)
- Final Stripping Work (VLCC)
- Preparatory Work for Entering Port and Loading Cargo (VLCC)
- Start of Loading Work （VLCC)
- Steady Loading Work （VLCC)
- Final Stage of Loading Work （VLCC)
- Setting Valve Positions for Navigation （VLCC)
- Special Loading Work （VLCC)
- Special Loading Work （VLCC)
- Work During Outward Voyage (VLCC)
- Work During Homeward Voyage (VLCC)
- Tank Pressure Control during Voyage (VLCC)
- Inspection and Maintenance Work during Voyage (VLCC)
- On the Estimation of Wave-Induced Loads Acting on General Merchant Ships by Rankine Source Method
- Design Loads used for Strength Assessment of Tankers
- Fatigue Assessment Method Considering the Effects of Mean Stress
Civil Engineering
- New Renovation Method for Slab of Jetty Structure Using High Durability Concrete Panel Cured with CO2 gas
- Bearing capacity of precast concrete pile
- Research on the systematization of material flow systems
- Research on the basic construction of next-generation planning support systems
- Research on next-generation planning support systems
- Metamorphic Material Handling Systems
- Value Engineering Proposals
- Property Condition Assessment Reports
- Guidelines for Design of Steel Structures
- Construction of Yokohama International Sports Stadium
- Experimental Research on Skin Friction Mechanisms of Shaped Piles in Sand (Ph.D Thesis)
- Fabrication of Offshore Structures
- Construction and Maintenance of Kobe-Awaji-Naruto Expressway
- Base Isolation System with Sliding Bearings and Rubber Bearings
- Development of Self-compacting Concrete using High Performance Lightweight Aggregate
- Seismic Risk Assessment of Buildings
- Application of High Strength and Self-Compacting Concrete for Continuous Diaphragm Walls
- Facility Management Services
- Approach to Incorporating Construction CALS in Highway Work
- Numerical Modeling for Predicting the Degradation of Cement-based Materials due to Calcium Leaching
- Research on the Effects of Measures to Inhibit Cracks by Pipe Cooling
- Research on thermal crack testing methods using restrained uniaxial testing equipment
- Seismic Risk Assessment Report
- Research related to application of surface coatings on concrete to prevent carbonation of existing reinforced concrete structures
- Technical Guidelines for Underground Storage Tanks
- Introduction to the concepts used in the observation, measurement and interpretation of fracture surface topography (E-J)
- Development of a Long-duration Underground Thermal Storage Type Roadway Snow-melting System
- Development of chemical admixtures in liquid form for self-compacting concrete
- Ushering in a new era of the Honshu-Shikoku three-route linkage
- DESIGN AND CONSTRUCTION OF FUJIKAWA CONCRETE ARCH BRIDGE
- Application of High Performance Lightweight Aggregate Concrete for Construction of Pre-stressed Concrete Box Girder Bridge
- Durability Investigation of PC Bridge after a Performance Period of 50 Years
- Research on Status Assessment and Maintenance System of Rigid-Frame Viaducts of the Tokaido Shinkansen (part.)
- Bearing capacity of bored pile packed with iron and steel slag using precast concrete pile
- Research ＆ Development and the Intellectual Property - Technology Development in Architecture and the Importance of Right Protection
- Mechanical properties of GF-reinforced thermoplastics
- Preliminary Feasibility Study Report (Soil Stabilizer)
- Study on Measurement of Chloride Content using Electromagnetic Wave in Reinforced Concrete Structures
- Prediction of Changes in Physical Properties with the Leaching of Components from Concrete
- Modeling of Leaching from Cementitious Materials used in Underground Environment
Automotive Engineering/Mechanical Engineering
- Development of Inverter for CIVIC Hybrid
- Development of Film decorated Front Grille
- Development of MS motor-driven scroll compressor
- Structural Adhesives used in Lamps in Automobiles
- Quality Assurance Rules
- Evaluation of Charge/Discharge Balance
- Starting Test Method in Cold Room
- Emission Targets for Zero-Level Emission Vehicles
- Research on the Effects of Ozone Reduction due to Ozone Conversion Catalysts
- Oxygen Sensor for Compressed Natural Gas Engine
- High Conversion Ratio Catalysts
- Environmental Report 2002
- Die Life Prediction using Surface Damage Map based on Investigation into Damage Behavior of Hot Forging Die
- Load Torque Tester
- Volvo Features and Benefits V70, 2003 (E-J) - New Course
- Predicting the Thermal Environment Inside a Car with CFD
- Volvo Cars Learning Center - Knowledge Base (E to J)
- Volvo Features and Benefits S40 (E-J)
- A Theoretical Study on Variable Gear-ratio Characteristics of EPS(Electric Power Steering) applied Cables to Connect Steering Wheel and Gearbox
Energy/Power Plant/Environment
- Toxic Metals Release During Pulverized Coal Combustion
- Mercury Release During Pulverized Coal Combustion (Literature Survey)
- Regulatory Trends: Toxic Metals Emissions from Coal-fired Power Plants
- Desulfurization Technology in Fluidized Bed Boilers
- Regulatory Trends in the USA - Emission Levels
- Analysis of Toxic Metals in Coal and their Removal from Furnaces in Coal-fire Combustion Facilities
- Development of Simulations for Toxic Metals Release during Pulverized Coal Combustion
- Development of High-Efficiency Biomass Energy Conversion Technology
Software/Computers/ IT/Localization
- Supply Chain Management Suite - Localization
- Important New Features of V3.0 of CCR Software
- Software Manual - Spectrometric Film Thickness Measurement System
- AspenPlus - Localization
- Mobile Phone Hinge Tester
- Security Server Interoperability - User's Guide
- SSIT Corporate Brochure (.Powerpoint)
- NASDAQ JAPAN Project Overview (Powerpoint)
- T/LMS(G) System Architecture
- T/LMS Globalization Master Schedule J-E
- Java Class Design Standards
- PROSSIMO Application Software Supplementary Manual
- Outline Specifications of Face Recognition Board
- Applet Developer's Guide
- Press Release - Image Scanner
- Aspen AMS Updates
- Websphere e-portal solution - Deliver information efficiently in the on demand world of retail.
Development Projects
- Water Supply Systems (of various countries)
- East Timor Water Supply Project
- Water Supply Project - Central Highland Provinces (Ea Drong)
- Water Treatment Plant - Vietnam
- Sewerage Systems (of various countries)
- Wastewater Treatment Plants (Bangkok, Thailand)
Patents (J to E)
GENERAL TOPICS
- Equipment and methods for lithographic processes
- Electro-optical devices and manufacturing methods
- Light emitting devices and Illuminating equipment
- Test probes
- Respiration measurement devices
- Visual inspection devices
- Video coding and decoding devices
- Electronic substrate manufacturing methods
- Screw driving devices
- Mounter devices
- Light emitting elements
- Control devices
- Photonic bandgap fiber
- Magnetic recording medium
- Quantum key distribution protocol
- Semiconductor devices
- Electric motors
- Linear motors
- Endoscopes
- Applicators
- Exposure apparatus
- Powdered fluorescent materials
- Electrically-powered vehicles
- Organ opening procedures
- Internal Combustion Engines
- Exposure methods
- Fuel cell separators
- Motor control methods
- Image display apparatus
- Fluid injection apparatus
- Brushless motors
- Bandpass filters
- Frequency dividers
- Electric motor and stators
- Substrates
- Speaker systems and microphone systems
- Wavelength selective elements
- Steering devices
- Expansion turbines